MADE IN THE USA
Basic Frame consists of all round tube complete with laser cut parts and tig welded as shown. Our frame will save you 150lbs immediately and give you all the caster you want and near zero bump steer. This is the best round tube frame in the market today bar none, quality is unsurpassed. Often copied but never imitated.
Frame Type Options
- Big Spring - Big stock spring that store energy for lower horsepower cars. 1000hp below.
- Coil over - Big horsepower cars that do not need weight transfer/store energy.
- Mild Steel - Weighs 98lbs with strut bars
- Chrome moly - Weights 58lbs with strut bars
Firewall Bar Options
- Bolt on Firewall Kit - Welded Firewall Bars on Frame with shims and Rod Ends to adjust and bolt to firewall (Some Drilling Required)
- Firewall Bars- Welded to frame without shims for bolting on (Welding to Firewall Required)
This Frame fits 2nd Gen Camaro (70-81). All round tube with your choice of chrome moly or mild steel. All bracketry is laser cut with lightening holes and tig welded. They are also available in big spring version (stock style spring) or coil over spring. These frames are for motor plates only. Stock upper and lower control arms will work as well.
|Mild Steel Frame
|Add 4130 Chromoly
|Firewall Bars & Bolt-In Kit (Optional)
|Front Motor Plate BB or SB
|Mid Motor Plate 1/4" or 1/8"
|Big Block Spacer kit
|Rack & Pinion
|Brake line kit
|Braided Brake lines
|Steering Shaft Kit w/ U-Joints
|Bump Steer Kit
|Trans Crossmember PG or T400
|Strange Brakes (Race-Slotted) Add $687.00
|Willwood Brakes (Street-Vented) Add $785.00
All frames are made to order. Lead time is typically 4-6 weeks.
Powdercoating also available for $200
Shipping is usually $250-300 but may vary.
To Order Please Call